BUFFER BOTTLE 20 L 230 Bars + Standard valve

20 L 230 Bar TPED Buffer Cylinder with DIN 230 bar PI standard valve and cap

The 15L 230 Bar Buffer Bottle is filled via the DIN 300 hose nozzle of the compressor and allows you to recharge:

- 4 Bottles of Paintball 0.8L to 3000 Psi (or 450 shots per bottle)

Description on the number of refill:

To fill a bottle of 0.8L at 3000 Psi you need 200 Bar of pressure in the buffer bottle (200 Bar = 3000 psi)

When your buffer bottle is filled to 230 Bar, you can use 30 Bar said useful load (ie 230 Bar minus 200 Bar)

For a buffer bottle of 15L 230 Bar you have the following calculation:

- 15 L ( Buffer bottle volume ) x 30 Bar ( Payload ) = 600

- Divided by ( / )

- 0,8L ( Paintball bottle volume ) x 200 Bar ( Pressure needed to fill at 3000 Psi ) = 160

- You get 3,75 which corresponds to the number of full refills of 0,8L air cylinder at 3000 Psi ( for a capacity of 450 shots )

Afterwards, if you don't fill your buffer cylinder, and you only have 200 Bar left, you will have a loss of pressure which will allow you to continue to fill your 0.8l cylinder but no longer at 3000 Psi but at 2800 Psi and then at 2600 Psi ...